Pioneer gm-d9601

[Aqeeb127]

Hi im missing a chip on this amp and need help

 

[jfet]

hi, irs2092s like gm-d9701

 

[jfet]

check the pins and on the map

 

[Aqeeb127]

Thanks man

 

[Aqeeb127]

Hi there is a missing resistor also if you look on the pic its above the missing chip R164

 

[Aqeeb127]

Hi ive fitted the chip still no sound

 

[Aqeeb127]

Does anyone haave the schematic for me please

 

[Perry Babin]

Hopefully someone will have the right manual. The only thing close I have is the 9605 which uses the 2902 in the sub channel.
http://www.bcae1.com/temp/pioneer - GM-D9605.pdf

 

[Aqeeb127]

Thanks perry and i havent forgotten yet i am going to purchase your tutorial its just im looking for a bank that does pay into paypal

 

[Hexhclass]

R164 not used

 

[Aqeeb127]

Yes i saw on the schematic thanks for your input ian33 much appreciated

 

[caraudioguy2100]

I have the same amp here and yes it uses the IRS2092S IC

 

[Aqeeb127]

Hi man can you please send som pictures as somepne else worked on this amp and it makes it much harder for me to figure out whats missing and all

 

[caraudioguy2100]

I’ll send some pics of the amp when I get back home later

 

[Aqeeb127]

It would be highly appreciated thanks in advance

 

[Aqeeb127]

Hi at caraudioguy2100 do you still have the amp as im in need of those pictures it would really help me out as i cannot figure out what the previous repair guy did to this amp

 

[caraudioguy2100]

I have the amp here some parts have been removed from the board but I can tell pretty much what goes where.


What does your amp do or not do

 

[Aqeeb127]

No sound and ive fitted the irs2092s and ive fitted fresh outputs

 

[Aqeeb127]

Amp goes fully on but no sound and i need the capacitor value of c141 please

 

[caraudioguy2100]

Have you checked to see if the amp is producing rail and regulated voltages?

C141 is a 10uf 50 volt cap

Have you checked the 5,12 and 15 volt regulators to make sure they have the correct voltage ?