Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|15th December 2019, 09:10 PM||#1|
Join Date: Jan 2016
Hertz HP1KD pre-amp problems??
I have problems with this HERTZ HP1KD, which has no audio output.
I got another technical assistance, they were not able to repair the exit.
I have repaired the output, thoroughly checking the driver board (replaced ir21844s, lm211, tl072 and 1.5uf capacitors (out of values) connected to pin 2 of 21844 and all 360LC.
I've checked all the voltages, + rail –rail, + 12v -12v, 3.3v, + 5v -5v. and they are all correct and present in the circuit.
I have injected 50Hz and 100Hz signal directly into pin 2 of tl072 using R76 to limit the function generator signal. Amplify well, with distortion, but at least amplify.
I think the problem is in the pre-amplification stage, I have reviewed everything, but not having a scheme, it is hard for me to locate the problem.
I have to say that resistance R158 is missing, I don't know its value…. I don't know if it could be the problem. I have tried changing resistances of different values: 200Kohm, 4.7Kohm and 1Kohm, without obtaining any positive results.
Has anyone had a similar problem?
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Hertz HP1D problems||ViNzZz||Car Audio||64||15th May 2019 01:09 PM|
|DIY 50 Hertz and below Sub||djkiwi||Subwoofers||26||2nd May 2012 03:52 PM|
|Hertz hsk 165||zumbo02||Car Audio||0||4th February 2012 01:19 AM|
|Help!...it hertz||crick||Full Range||9||2nd July 2007 08:34 PM|
|Zero hertz||jaberwocky6669||Multi-Way||36||16th June 2007 03:59 AM|
|New To Site?||Need Help?|