Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Thermal solutions for car amps
Thermal solutions for car amps
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 6th March 2019, 04:25 PM   #21
jkrokenberger is offline jkrokenberger  United States
diyAudio Member
 
Join Date: Jun 2018
If the MT+ works well please let us know. I'd be willing to try it out. Is that Rodek a Zed? Very nice amp to keep alive instead of let go to the shelf of misfit amplifiers.
  Reply With Quote
Old 6th March 2019, 10:25 PM   #22
Cartel is offline Cartel
diyAudio Member
 
Join Date: Jan 2019
Thermal solutions for car amps
Quote:
Originally Posted by jkrokenberger View Post
If the MT+ works well please let us know. I'd be willing to try it out. Is that Rodek a Zed? Very nice amp to keep alive instead of let go to the shelf of misfit amplifiers.
I'm sure it will work great.
Its almost 3 times better than regular MT.
I'm using 2mm but there is 1.5 and 1mm also.
  Reply With Quote
Old 6th March 2019, 11:34 PM   #23
Cartel is offline Cartel
diyAudio Member
 
Join Date: Jan 2019
Thermal solutions for car amps
Well its back together.
I dried the cardboard and re-used it.
It fits almost perfectly flush with nothing on the big mosfets and the nylon shims from the factory work perfect on the smaller to220's but that thin cardboard must be needed to absorb vibrations and act as a gasket.

Its working great again I dont smell anything getting hot.

I put some white glue on the nuts.
I didn't crank them down this time, just snugged them to like 3 or 4 ft/lbs if that.
I think I went way too tight last time.


Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
  Reply With Quote

Reply


Thermal solutions for car ampsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
heatisnk copper shims, thermal paste or thermal pad? vishalk Solid State 11 12th March 2018 05:30 PM
Biasing/thermal compensation of Thermal Trak transistors Bob Cordell Solid State 161 8th March 2014 08:42 AM
Worth doing cheap "thermal protection fuses" in hot amps? cfcubed Pass Labs 4 15th June 2008 02:27 AM
help with Thermal Impdeance vs. Thermal Conductivity Eric Pass Labs 4 22nd July 2005 07:23 PM


New To Site? Need Help?

All times are GMT. The time now is 04:19 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki