Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Infinity Reference 475a
Infinity Reference 475a
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th January 2019, 07:15 PM   #11
PapaZBill is offline PapaZBill  United States
diyAudio Member
 
PapaZBill's Avatar
 
Join Date: Oct 2013
Location: Yale, Oklahoma
Assuming you replaced D4 or anything else you may have removed, clamped board in chassis, and load each amp with a 2 ohm dummy load if you have one, or 2 ohm test speakers or 4 ohm bridged will do.Apply signal with no more than 10 watts power. Use a 12 gauge or bigger short length of cable. Briefly short across each channel. The amp should go into protection and back out again.Short each channel to power ground. You should have the same result.

You can thermal test the amp also. Run amp at or near clipping. Use a 1khz test tone into 2 ohm stereo or 4 ohm bridged dummy load. If running speakers in either configuration, use hard hitting music at high volumes. A test tone is libel to damage the voice coils. Dummy loads will thermal in a shorter time. You may want to let the amp thermal cycle a couple of times.
__________________
Any sufficiently advanced technology is indistinguishable from magic.

Arthur C. Clarke
  Reply With Quote
Old 17th January 2019, 05:35 PM   #12
Cekpi7 is offline Cekpi7
diyAudio Member
 
Join Date: Mar 2018
Thanks, i guess it was just bad solder joint, everything seems to be working fine now. Tested it with dummy load at full power, it's playing music for past 2h and doesn't go into protect, i even try turning off and on few times.
  Reply With Quote

Reply


Infinity Reference 475aHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Infinity 475A Problem, going in and out protection mode irvingsp Car Audio 12 30th April 2013 03:32 AM
Infinity Reference 61 MK2 midrange help junjuvava Multi-Way 0 16th February 2013 10:17 AM
Infinity 475a water damage detourbeach Class D 2 27th October 2010 12:13 AM
Pioneer DEH-P8600MP, Infinity Kappa 693.5i, and Infinity Reference 6402cfp, and more jawglasswell Swap Meet 0 13th March 2005 08:38 PM
infinity reference spinuz Multi-Way 0 4th November 2004 03:35 PM


New To Site? Need Help?

All times are GMT. The time now is 01:28 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki