Power Acoustik A2400DB - Help finding parts and traces

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
hi,

Some parts after second transformer burned and made a big hole on the pcb. Is there anybody who can assist me find parts and traces will be highly appreciated. Thank you in advance. Attaching the pictures of burned area.
 

Attachments

  • 20181206_172255.jpg
    20181206_172255.jpg
    911.3 KB · Views: 113
  • 20181206_164637.jpg
    20181206_164637.jpg
    976.8 KB · Views: 123
  • 20181206_172315.jpg
    20181206_172315.jpg
    985.4 KB · Views: 115
From my experience with these amps, the caps leak. The conductive electrolyte saturates the board and the board becomes conductive. When voltage is applied to the conductive area, the board heats up and burns.

I have somehow managed to create the connections through wires. i am getting the amplifier to come on. but it is pulling 2amps and without load if volume increase the current increasing too. and outputs getting hot even while idling . the waveform on gate of outputs have a dip on top. i am attaching the pictures. the driver board had plenty cold joints and i fixed but no luck.
 

Attachments

  • 20181215_140101.jpg
    20181215_140101.jpg
    655.1 KB · Views: 86
  • 20181215_140309.jpg
    20181215_140309.jpg
    877.8 KB · Views: 73
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.