help with a Powerbass asa1000.1 driver board

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Good afternoon all i know this may not be the right place but still its worth a try. I am repairing a powerbass asa1000.1 mono block which is similar in internal construction to the boss 3000 amps. the driver board as well is similarly constructed but uses more components and some are slightly different. however my problem is that two resistors R185 and R184 are both burnt beyond recognition. I was able to compare the board to a boss driver board to successfully replace all the other burnt resistors but the boss dos'nt carry those resistors so i dont know what values to replace them with. Can anyone please help? I've added a photo of the board if it can help
 

Attachments

  • 20180914_125936.jpg
    20180914_125936.jpg
    1.1 MB · Views: 92
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.