Amp repair

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
20170304_224240_zpsb9rc1ybk.jpg
 
That is Thermally Conductive but Electrically Insulating Sheet.

It must not be removed. The Transistors must NOT be allowed to sit directly against the Chassis..................or BANG!!!

Similar can be purchased from your usual supplier of parts or ebay maybe?

No Thermal Paste necessary.

P.
 
No, so long as you use that Thermal Strip/Sheet.

There was no Thermal Paste to remove. Was there?

With the Thermal Strip in place, bolt the Transistors down and then measure for any continuity between the Chassis and the Transistor Tags. There shouldn't be any.
Then you're good to go.

P.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.