I got this amp from a friend. The fuse holder looks like it has gotten hot at 1 point.
I reflowed the solder on the fuse holders and tryed powering it up.
The amp will draw excessive current.
So i checked the power supply fets and the output transistors. All test good.
So wondering what i check now since the amp draws excessive current?
I reflowed the solder on the fuse holders and tryed powering it up.
The amp will draw excessive current.
So i checked the power supply fets and the output transistors. All test good.
So wondering what i check now since the amp draws excessive current?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.