|Audio Poutine Hand built audio components from Audio Poutine|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|28th April 2013, 10:33 PM||#1|
Join Date: Jun 2012
Location: Nanaimo, BC
cDAC+ Assembly - Cable DAC
This is just a short guide on assembling a basic cDAC+.
First: Cut out the holes for the USB, power jack, and wire.
Next: There are 2 options. Either solder the wire to the cDAC+ board and then slide it out the enclosure or slide the wire in the enclosure and then solder to the board. I recommend the first option as it is a tight fit if you choose the second.
You will need to solder on the power jack as well.
Next: Flip the board right side up and slide it into the enclosure. (Inserting the USB side first) Secure the board with the 2 silver screws provided. Then screw the top on the enclosure.
Last: Solder on 2x RCA jacks or 1x 3.5mm jack to the end of your wire. I am going to reference this post on head-fi for soldering various jacks.
Last edited by xCanadianPandax; 28th April 2013 at 10:47 PM. Reason: Fix Image size
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|cDAC+||jtktam||Audio Poutine||13||29th June 2016 03:19 AM|
|DAC Hifidiy Olympic PCM1798 assembly and problem||mati1979||Digital Source||39||8th May 2013 03:38 PM|
|cDAC+ Launch Sale||xCanadianPandax||Audio Poutine||0||8th April 2013 12:07 AM|
|Source for KSS-210a cable assembly?||r0cket-||Digital Source||0||29th November 2004 04:28 AM|
|New To Site?||Need Help?|