• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

F/S Flat Panel Ribbon Tweeters NEO24 SOLD OUT....

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Member
Joined 2002
Paid Member
Just got in stock 24 pairs of an:
American Technology NeoPlanar Neo Neo 24

3.6 Ohm 250Watt
Neodymium Magnet, Magnetic HiFi Speakers
Dimensions; 24" long X 3.5" Wide X 3/16" Deep
Weight: 1 lb 12 Oz
DCR and Impedence 3.6 Ohms
Freq Response 180Hz - 20Khz
Power handling 250 Watts
Sensitivity: 91dB at 1 Watt/ 1 Meter

Here's a link to a Ebay listing:
2 X 24" 250Watt 3.6 Ohm ATC NeoPlanar NEO24 Neodymium Planar FLAT Speakers | eBay

$139.95 per pair

THANK YOU DIY AUDIO, DIDN"T EVEN LIST THESE ON THE WEBSITE
 
Last edited:
I'm working with my friend bigfishe on a line array speaker that uses 3 pairs of ATC Neo planars purchased from Apex Jr. We using 3 planars per side in a stereo array. The sound is surprising good when augmented by H-frame dipolar 15" woofers for bass coverage. A little EQ to blend the woofers and the planar array plus additional EQ to boost the upper half-octave seems to be all that is needed to finish this project.

But we do have an issue. One of our planars seems to be open. I've done the usual testing and visual inspections but I do not see a break in the circuit traces.

If anyone has a spare planar (or pair) to replace the open unit, please contact me and compensation can be arranged. Steve has promised to keep on the lookout for a replacement so I hope that we will have a happy ending to this project. Thanks.

Jim
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.