• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Samwha 8200Mfd / 100v Cap pins

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
DarpMalone

DarpMalone

Member
Joined 2008
Hi Steve,

I built a linear power supply with these last night and when testing, I noticed a short in the circuit.

According to the label on the caps, pin B is positive (100v), pins A & C are blank and the 4th, (unlabeled) pin is negative. (see the attached photo)

Samwha8200.jpg


When I do a continuity test on the caps though I see pins B and the unlabeled pin have continuity (this explains the short).

Are these labeled incorrectly or am I missing something?

Thanks for your help.

Justin
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom