Hi, Better late than never!
Basically it's a complementary common base amplifier with only two transistors: BC485 and BC486.
The collectors are connected together and the input goes to the emitters through 2200uF capacitors. The bases are grounded.
The output is taken from the collectors through a 22uF tantalum cap.
When I have time I will draw a schematic. Ortofon was unable to provide one.
Basically it's a complementary common base amplifier with only two transistors: BC485 and BC486.
The collectors are connected together and the input goes to the emitters through 2200uF capacitors. The bases are grounded.
The output is taken from the collectors through a 22uF tantalum cap.
When I have time I will draw a schematic. Ortofon was unable to provide one.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.