Hello!
i got a Technics sp10 mk2 p/l (bbc version). The turntable and the psu have been recaped some months ago, the psu adjusted on the correct voltages and also there are not ripples to them, the motor is oild and the turntable looks in very good condition generally. The problem is that after 1,5 - 2 hours the psu gets really hot and the speed of the turntable gets unstable. I send the turntable back to my technician to solder again some joints on the psu to be sure that everything is ok but still the problem remains. The turntable loose its speed lock after some hours. Does anyone had the same problem with his sp10? Best regards!
i got a Technics sp10 mk2 p/l (bbc version). The turntable and the psu have been recaped some months ago, the psu adjusted on the correct voltages and also there are not ripples to them, the motor is oild and the turntable looks in very good condition generally. The problem is that after 1,5 - 2 hours the psu gets really hot and the speed of the turntable gets unstable. I send the turntable back to my technician to solder again some joints on the psu to be sure that everything is ok but still the problem remains. The turntable loose its speed lock after some hours. Does anyone had the same problem with his sp10? Best regards!
There is a whole SP10 restoration thread here. The Incredible Technics SP-10 Thread
Have a read then ask there.
Edit: I see you have. I would bump that thread as it would be seen.
Have a read then ask there.
Edit: I see you have. I would bump that thread as it would be seen.
There is a whole SP10 restoration thread here. The Incredible Technics SP-10 Thread
Have a read then ask there.
Edit: I see you have. I would bump that thread as it would be seen.
Thank u!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.