Plinth for Thorens 150 & 160

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
You are welcome. A lot of information on restorations, tuning and construction of plinths on Analog Dept
 

Attachments

  • Thorans TD 150 plint.jpg
    Thorans TD 150 plint.jpg
    268.6 KB · Views: 389

PRR

Member
Joined 2003
Paid Member
...someone else will need to translate the relavent German notes....

It is a Rosetta Stone. Same words in different languages. Here's the English for your copy/paste. (Of course if you can bind titus2002's image into your PDF, French and Germans can squint their words.)

WARNING
This template may shrink in storage or if glued onto a wooden board. It is therefore advisable to check the dimensions before cutting out and to make corrections if necessary.

THORENS
TD150/II
Mounting template

The exact position of the 5 holes shall be taken from the chassis

The 3 seatings may be milled off 7/64" (2,8mm) or replaced by battens if required.

(sideways)

Seatings milled off.

Mounting with battens.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.