B&K Pro 10 MC power supply

[Hunter60]

I've recently acquired a N&K Pro 10 MC preamp, unfortunately sans power supply. Does anyone have the power requirements, pin outs, etc., or schematic for the powrr supply for this pre? Or a power supply for same that they would be interested in selling?

 

[rayma]

I've recently acquired a N&K Pro 10 MC preamp, unfortunately sans power supply.
Does anyone have the power requirements, pin outs, etc., or schematic

All I've found is "only the power transformer is external, 24VACx2 plus 10VAC from Plitron."

Another says it was a DC external supply, that would be more likely. "I seem to remember
it simply being a +/- DC power supply that was somewhere around +18vdc and -18vdc.
The preamp has internal +/- 15vdc voltage regulators for both pos and neg supplies so the
power supply input voltage was not at all critical."
BK Components Pro 10 MC - Manual - Stereo Pre Amplifier - HiFi Engine

You can probably figure out the pins by working backward from the internal regulators/rectifiers.
PCB Mount Transformer Specs | Plitron Manufacturing

 

[olomana808]

My B&K PS

Not sure how to post the pictures if that would help. Don’t have the specs. Just a working PS for my Pro 10 mc sonata series preamp

 

[olomana808]

Think I got the photo hosting thing.

An externally hosted image should be here but it was not working when we last tested it.

 

[PRR]

Link is munged. Try this.

B&K power supply - Album on Imgur

OR use the Attach function in this forum. It works slick and keeps the image with the message even as photo-host sites come and go.

 

[olomana808]

Found this schematic on audiokarma

Not able to confirm since my voltmeter crapped out

Schematic PS pro10mc - Album on Imgur

 

[Hunter60]

Thanks for the leads. Was able to gather enough info and schematic to build one. Couldn't find the appropriate xformer from Plitron, but was able to source a custom wound to my (B&K's) specs..Works very well.

 

[pasaarun]

pro 10mc power supply

Hi,
This is an old thread but decided to try my luck anyway. I have b&k pro 10mc without power supply. I have been searching ebay and other places for the ps but to no avail. Could you respond with details as to what components (enclosure, transformer and such)you used to build the ps. Thanks in advance.