RCA cable replacement on Sanyo turntable

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
X

xxllmm4

Member
Joined 2015
Hey everyone,

I'm about to replace the built in RCA cables with ground on my old Sanyo turntable, they seem to have a short somewhere in the wires. So my question is can I just cut some standard RCA cables and use them? Or do I need something special, or easier to work with?

Thanks
Jordon
 
rayma

rayma

Moderator
Joined 2011
xxllmm4 said:
I'm about to replace the built in RCA cables with ground on my old Sanyo turntable, they seem to have a short
somewhere in the wires. So my question is can I just cut some standard RCA cables and use them?
Click to expand...

The short is most likely in or near the RCA plugs, so you could try cutting off a few inches at the end
and adding new plugs first, before replacing the cables completely.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom