Noise suppressors in cable construction

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi,

I've been designing my own silver interconnects but I was wondering about ferrite noise suppressors. My questions is quite simple! All I need to know is how many noise suppressers do you need on each interconnect and where would I place them along the length of the interconnect?

Thanks in advance.
 
Ferrite beads are sometimes used at the input of high gain amps (microphone or measurment amps). Placed as close as is possible to the amplifier input. If you are in a very strong AM field (next door to a radio station) you may need them on the output of a (poorly designed) power amp. E
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.