Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.

Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old Today, 09:50 AM   #2161
nocdplz is offline nocdplz
diyAudio Member
nocdplz's Avatar
Join Date: May 2010
Location: italy
hi Ralf
....followed by his servo rail... #2159
Not pushed, I had understood that, my compliments were precisely for that brilliant separation between the two actions, that I consider really revolutionary.
But moving an headshell of a few grams is different from a whole arm, especially if you have to apply the force from the wrong side of the linear bearing. (laterally)
I had designed the Syrinx counting on a stylus drag of 1 gr ca, as found on the web, but after the fault I measured with the pendulum 2-300 mgr at most.
Clarifying: this in practice means that the Side Force (up to 0,8 gr till skipping + lever) becomes greatly prevalent on the Stylus Drag which would act in the right direction for the linear bearing. Result: linear bearing blocked

ciao carlo

Last edited by nocdplz; Today at 10:04 AM.
  Reply With Quote


Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Gliding for 90 - mechanical linear tonearms: no airpump, no servo directdriver Analogue Source 33 3rd April 2016 11:40 PM
Angling of ports and/or drivers? Dave McReeferson Full Range 11 27th March 2012 07:45 PM
String suspension vs. uni pivot or gimball tonearms nghiep Analogue Source 26 13th August 2011 04:27 AM
Angling drivers left and right in a vertical line-array???? ozziozzi Multi-Way 12 16th January 2009 04:23 AM
Need Amp For 90-0-90 V DC Drafance007 Solid State 15 12th October 2003 08:03 PM

New To Site? Need Help?

All times are GMT. The time now is 06:00 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio