Simplistic NJFET RIAA

[RCruz]

Fantastic results.

Did you use NOS BG or did you save them from previous experiments ?

If these are NOS, how long did you burn them in ?

 

[merlin el mago]

No aren't NOS, are from older projects so are burned.

Imagine the BIG change BG does that now I have to adjust the value for C2 RIAA capacitors: after 16nF024 now 15nF977 & possible will finish 15nF930 or less.

 

[acidbrain]

So they are BOS ? burned old stock

 

[RCruz]

BOS might be even better than NOS

Everything depends on the burning.

 

[RCruz]

Just finished my main PCB according Salas instructions.
I attached files for main, copper and silkscreen in PDF format.

Right now I gonna prepare my self to etch my first PCB.

Nice work !

Please post some pictures of the pcb (after you etch them).

 

[Franz Gysi]

Nice work !

Please post some pictures of the pcb (after you etch them).

Yes, it looks good.

But a comment to the grounding: afaik it is not good to change from wide traces to narrow traces and vice versa.

Specially not when currents are flowing, what is the case for the grounding, specially between the bypass caps.

Franz

/Edit: try to explain (afaik): different size of traces is resulting in minimal differences of conducitvity eg. resistance. When currents are flowing this will produce voltage differences on the grounding traces. And this is to be avoided. Better use one trace width, as large as possible.

 

[merlin el mago]

BOS might be even better than NOS

Everything depends on the burning.

The burning was doing with 1st quality wood (ebony) & slow fire to cook the cap as better as possible.

 

[RCruz]

You did not forget the garlic did you ?

 

[massimo]

@NPower
In your pcb I don't like IN gnd + RL gnd not referred with thier own track to star gnd. If you connect them to D4 gnd and R2V gnd, you mix up Signal gnd and Power gnd. Not good at all.
Take example from OUT gnd and R8 gnd: correct routing.
Plenty of space to fix this problem....

 

[merlin el mago]

You did not forget the garlic did you ?

I forgot thanks for advice I will do "a la llauna" catalan typical foot

 

[massimo]

Cod (bacalao), not snails, I hope!

Nice typo: catalan typical foot
Some of those are now on TV.... vs Switzerland!

 

[merlin el mago]

Spain 0 Switzerland 1

 

[merlin el mago]

Cod (bacalao), not snails, I hope!

Nice typo: catalan typical foot
Some of those are now on TV.... vs Switzerland!

Cod of course.

 

[massimo]

Italy isn't Inter, as well as Spain isn't Barca!

 

[Franz Gysi]

Switzerland 1 Spain 0

You see

I knew it before...

 

[merlin el mago]

You see

I knew it before...

Congratulations Franz.

 

[Franz Gysi]

Smile...

Indeed, I am not interested in football. But I was in a local bar, drinking beer.

And this was fun, a big surprize.

Franz

BTW:
My audio chain is sounding awesome, actually...

 

[Salas]

You watch football and blow vuvuzelas, I experiment on phono.

 

[Franz Gysi]

I am listening to the Wall, Pink Floyd, dear Salas! With great pleasure with the simplistic amp, optimized tonearm mass (thanks to my spanish friends), best available analogue crossover, big speakers.

Nice sovjet caps on your board

Bypass or also for RIAA?

Franz

 

[Salas]

Those are Teflon bypasses for the interstage and output. I am using C0G/NP0 for Riaa filter. The last one NP0 that defines treble quantity will be on those sockets as well as the input load resistor.