|Analogue Source Turntables, Tonearms, Cartridges, Phono Stages, Tuners, Tape Recorders, etc.|
Please consider donating to help us continue to serve you.
Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
||Thread Tools||Search this Thread|
|5th April 2008, 09:02 PM||#1|
Join Date: May 2006
Tapedeck Controls don't want to latch
I have a problem. Elsewhere, I posted an image of a vintage Tandberg TCD310 MK11 tapedeck which I bought recently. It has been cleaned-up and looked and worked superbly for a day or two.
Unexpectedly, the 'piano key' controls stopped wanting to latch. I've taken the front panel off trying to figure what the problem may be.
From the photograph, you can see I've taken the switch keys out but I cannot figure out how these should latch, once in place.
The controls are from left to right on/off (self-latching switch), rewind, stop, wind/fast forward, play (wider key) and record.
Directly after the self-latching switch, are 5 non-latching switches. Each of the keys hook into the L-shaped white thingies you can see in the pic.
Directly above the switches, is a pressed plate with 4 'fingers' which I stupidly bent carefully backwards and forwards in my efforts to see if I can get the function keys to latch. The flimsy springloaded channel plate pivots in two places in the panelmount for the meters. A small spring pulls this bar with the 4 'fingers' upwards. At the righthand end of the '4-fingered', springloaded bar, is a thinner section which engages with a trap or latch mechanism similar to what one could find on oldtimer gates. Hereafter, I will post a second pic, showing this part.
In my efforts to work out how this lot works, all 4 'fingers' broke off after only two bending adjustments. All four have been hardsoldered back on after removing the bar but I must have got their angles wrong.
I am not sure if the springloaded bar and the 'fingers' are the actual latching mechanism or if there are an as yet unseen solenoid acting on the latch, holding the key controls in place, once pushed in.
Does anyone perhaps please have an idea how to fix the problem?
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Remove push latch on Neutrik B series sockets||fmak||Parts||0||2nd April 2007 12:17 PM|
|Mitsubishi tapedeck||gain wire||Parts||2||28th February 2007 10:59 AM|
|t-latch in LTSpice||zilog||Software Tools||0||13th January 2007 01:51 AM|
|How do I confirm the playback eq on the tapedeck (reel) meets the standard ?||percy||Analogue Source||1||12th November 2006 02:30 PM|
|Eumig FL 1000uP tapedeck||Stabist||Analogue Source||1||20th November 2004 03:16 PM|
|New To Site?||Need Help?|