making dual mono jack from single mono jack

dubmunkey · 12th October 2006, 01:04 PM

Hi all,

sorry if this is the wrong forum...

i have a mono signals i need to turn into two signals....im thinking that i could just splice the cable for a mno jack and connect half the cable to one jack and half to another...

my problem is im running audio into a filre which is mono but then i want it to go into my stereo compressor....am thinking just soplitting the mono signal into so each jack can go into each side of the comp...

just wanna check im on the right line before i go out and get the bits-

cheers

greg

dnsey · 12th October 2006, 03:03 PM

What you're suggesting will work (under most circumstances), but why not just use one channel of your compressor?

dubmunkey · 12th October 2006, 03:16 PM

hi,

basically it's weird compressor it uses rca stereo ins and outs, and as a result im only getting one speaker play my tune using the left side of the rca.... i want that 'old mono' sound which has the same going out of each speaker...not just one...

essentially im a little dumb when it come to signal flow - i really wish my filter (frostwave resonator) was stereo as i run all my beats through it but then find it hard to get them coming out of both speakers

cheers

greg

12th October 2006, 01:04 PM	#1
dubmunkey diyAudio Member Join Date: Oct 2006	making dual mono jack from single mono jack Hi all, sorry if this is the wrong forum... i have a mono signals i need to turn into two signals....im thinking that i could just splice the cable for a mno jack and connect half the cable to one jack and half to another... my problem is im running audio into a filre which is mono but then i want it to go into my stereo compressor....am thinking just soplitting the mono signal into so each jack can go into each side of the comp... just wanna check im on the right line before i go out and get the bits- cheers greg

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Single or double transformers for dual mono amp?	Bernie7	Class D	1	30th December 2008 02:19 PM
2 Mono Jack to Female Stereo Jack	JellyMan	Everything Else	2	27th May 2008 04:39 PM
Max current trough a 3.5mm mono jack.	Douchekop	Parts	3	25th August 2005 11:56 PM
Safety issue using (mono) jack plugs	Johnix	Parts	4	9th August 2004 10:41 AM
Single Mono's or Dual Mono?	Tazzy	Pass Labs	8	3rd October 2002 03:03 PM

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

12th October 2006, 03:03 PM	#2
dnsey diyAudio Member Join Date: Mar 2004 Location: Shropshire, England	What you're suggesting will work (under most circumstances), but why not just use one channel of your compressor?

12th October 2006, 03:16 PM	#3
dubmunkey diyAudio Member Join Date: Oct 2006	hi, basically it's weird compressor it uses rca stereo ins and outs, and as a result im only getting one speaker play my tune using the left side of the rca.... i want that 'old mono' sound which has the same going out of each speaker...not just one... essentially im a little dumb when it come to signal flow - i really wish my filter (frostwave resonator) was stereo as i run all my beats through it but then find it hard to get them coming out of both speakers cheers greg