Another amplifying stage, inspired by Blowtorch

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
First, schematic with examples and PSRR difference with 400 Ohms load. As I see it`s just a matter of output cap value to flat out at higher frequencies.(never mind it`s not +24V on every example, it`s not important) 3rd example looks best in sim and there`s no base current problem, circuit have high current gain..
 

Attachments

  • 01 sch.png
    01 sch.png
    30.5 KB · Views: 135
  • PSRR.png
    PSRR.png
    60.5 KB · Views: 126
Last edited:
Output impedance and MicroCap12 file, for experimenting on your own if you`re interested. All models from MC library.. (it' 1 ohm btw, kind of high but very linear) That's why I asked is there any difference in sound between different solutions.
Cheers!
 

Attachments

  • OutputImpedances.png
    OutputImpedances.png
    60.9 KB · Views: 112
  • CamMultiplerExamples 01.zip
    19.7 KB · Views: 31
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.