Fully adjustable three-way active crossover - Page 3

Tromperie · 31st October 2017, 10:58 PM

Boden,
Your post adds nothing and makes you little more than a serial pest. If you have nothing positive to offer, desist. The two links add nothing.

This thread was created to advise members of the existence of the article, and they can take from it what they wish. It was not an invitation to post unwarranted criticisms based on your opinion.

kimbo · 1st November 2017, 12:33 AM

Thanks for the links Boden. Also very interesting.

clay-speakers · 5th January 2019, 11:40 PM

Hey this looks like a really useful project especially for say the development of a three way active speaker. Has anyone built one yet?
I just checked Altronics & Jaycar but no kits yet.

kimbo · 8th January 2019, 04:37 AM

I note that the PCB is available from SC for $20. Also a set of SMD parts for $30 and set of pots with knobs for $50. So I wouldn't be too surprised if a kit wasn't produced by Jaycar et al.

31st October 2017, 10:58 PM	#21
Tromperie diyAudio Member Join Date: May 2015 Location: Melbourne	Boden, Your post adds nothing and makes you little more than a serial pest. If you have nothing positive to offer, desist. The two links add nothing. This thread was created to advise members of the existence of the article, and they can take from it what they wish. It was not an invitation to post unwarranted criticisms based on your opinion. __________________ Source: Daphile on old PC from the tip * Storage NAS: FreeNAS 11 * Pre-amp: DIY PGA2310 * Amps: 8 x LM3886TF Xover: 24dB @ 300 and 3,000Hz * Speakers: DIY design CNC cut 54 laminations * Drivers SB 10", SB 5", VIFA 1" VTG

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
low pass filter active adjustable	9justinas9	Analog Line Level	17	11th January 2016 04:45 PM
( F.S.) Fully serviced crown amps and Jbl active crossover.	Mr Daniel	Swap Meet	0	13th March 2015 07:08 PM
simplicity vs fully active ?	Designated Marksman	Multi-Way	13	4th June 2011 08:27 PM
Active XO adjustable	Scribble	Multi-Way	9	7th August 2006 09:45 PM
adjustable crossover	rv1890	Multi-Way	2	11th January 2005 11:03 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

1st November 2017, 12:33 AM	#22
kimbo diyAudio Member Join Date: Mar 2004 Location: Melbourne	Thanks for the links Boden. Also very interesting.

5th January 2019, 11:40 PM	#23
clay-speakers diyAudio Member Join Date: Aug 2006 Location: Gold Coast, Australia	Hey this looks like a really useful project especially for say the development of a three way active speaker. Has anyone built one yet? I just checked Altronics & Jaycar but no kits yet.

8th January 2019, 04:37 AM	#24
kimbo diyAudio Member Join Date: Mar 2004 Location: Melbourne	I note that the PCB is available from SC for $20. Also a set of SMD parts for $30 and set of pots with knobs for $50. So I wouldn't be too surprised if a kit wasn't produced by Jaycar et al.