Alchemist Forseti APD21A Pre Amplifier PSU

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi
does anyone know the output voltages of the transformer in the
Alchemist Forseti APD21A Pre Amplifier's Power supply unit?

Its a small torroid with two secondary outputs each with a 0v centre tap so its six wires in all. The output on the DC plug end is two +v and two -v with one 0v.

The manufacturer no longer has data on this transformer and its dead short so no volts out!

I think its about 25v 0v 25 each winding but need to be sure. The colour codes on the PSU are
2 reds 1 black winding one

2 whites 1 green winding two

I await your replies


thanks
Phil
 
Hi
Just found this thread after searching on Google for info on that preamp.
The design is weird, with dual-mono external power supply providing +/-32V, which is then regulated internally to +/- 18V, which is then regulated again to +/-12V by an adjustable regulator.
The actual circuit has 2 op-amps for the adjustable regulator, 1 op-amp for signal path, and another op-amp acting as DC-Servo. Output stage is using TIP-31C/32C biased into Class-A by the adjustable regulator.
Sounds confusing? it is !
Don't bother with balanced inputs/outputs, as they are converted into unbalanced by a crappy op-amp.
Yair
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.