Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Analog Line Level Preamplifiers , Passive Pre-amps, Crossovers, etc.

Yet another Volume controlers and source selections
Yet another Volume controlers and source selections
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th August 2009, 02:24 PM   #1
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
Default Yet another Volume controlers and source selections

I will post more projects that was made by me :
1. Volume controller / source selector for motor potentiometer ( like Alps blue velvet ) :
-schematics
-avr atmega8515 soft
-pcb
On atmega8515 you have to write only the fuse-bit named :
" Internal RC oscillator 8Mhz "
Attached Images
File Type: gif atmega8515_motor_pot.GIF (55.1 KB, 19156 views)
File Type: jpg FP REV 9 A.JPG (95.4 KB, 18507 views)
File Type: jpg IS REV 4 A.JPG (76.5 KB, 16959 views)
File Type: jpg PSU REV B.JPG (84.5 KB, 16419 views)
Attached Files
File Type: zip lcd_m8515_v_1_5_ons.zip (15.6 KB, 1695 views)
  Reply With Quote
Old 25th August 2009, 02:25 PM   #2
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
pdf with the pcb for to etch your own pcb .
Attached Files
File Type: zip PDF SELECTOR DANZUP.zip (32.8 KB, 1926 views)
  Reply With Quote
Old 25th August 2009, 02:44 PM   #3
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
Default Project nr.2

2. Volume controller atmega8515 and pga2310 for volume control
I will be back with the software .
Attached Images
File Type: jpg pga2310_atmega8515.jpg (177.3 KB, 16241 views)
File Type: jpg pga2310_atmega8515_pcb.jpg (114.3 KB, 4324 views)
  Reply With Quote
Old 25th August 2009, 02:56 PM   #4
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
Default Projetc nr.3

3. Control and audio select with relay and r2r volume
- volume with quality MELF resistors for r2r or shunt adjusting
- infrared remote control in the stop / start amplifier
- selection from 4 sources of signal relays
- version Display with LED or LCD display as it wants ( depending on board will possible planting to serve both variants )
Attached Files
File Type: zip Schema Volume controller ver1.0_2009.zip (246.2 KB, 2316 views)
File Type: pdf sch_control & display.pdf (42.8 KB, 1924 views)
File Type: pdf sch_encoder & pushbutton.pdf (12.3 KB, 1449 views)
File Type: pdf sch_supply & relays.pdf (26.1 KB, 1525 views)
  Reply With Quote
Old 25th August 2009, 02:59 PM   #5
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
Some pcb ready .
http://i25.tinypic.com/25so978.jpg
Attached Images
File Type: jpg rsz_1p1050539.jpg (144.9 KB, 3547 views)
File Type: jpg rsz_3p1050538.jpg (148.7 KB, 3523 views)
File Type: jpg Imag002 (Medium).jpg (38.4 KB, 4252 views)
  Reply With Quote
Old 25th August 2009, 03:04 PM   #6
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
And some pictures with another type of testing different volume controler :
http://i33.tinypic.com/2q8zyhc.jpg
http://i38.tinypic.com/i78sd1.jpg
http://i29.tinypic.com/34rzlp5.jpg
  Reply With Quote
Old 26th August 2009, 04:47 AM   #7
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
4 . This project was made by me for a friend who buy from ebay a kit like this :
http://forum.analogmetric.com/viewth...a=page%3D1
but did not work at all !
So I write the software for this kit . I post here for everyone who want to use .
Atenttion : I have remove the AT89C2051 ( look at the old schematic ) from that pcb and replace with ATTINY2313 ( look at the new slightly modified schematics) which is more modern micro controller .
Attached Images
File Type: jpg ctrl_attiny2313.JPG (61.1 KB, 5977 views)
File Type: gif ALPS Remote Control Schematic_old.gif (28.6 KB, 4329 views)
Attached Files
File Type: zip ATTINY2313_ALPS_1.zip (12.4 KB, 777 views)

Last edited by danzup; 26th August 2009 at 04:55 AM.
  Reply With Quote
Old 26th August 2009, 05:05 AM   #8
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
Default Erratta

the correct soft for attiny2313 soft (that on precedence post do not work correct for power command)
Attached Files
File Type: zip ATTINY2313_ALPS_1.zip (12.4 KB, 976 views)
  Reply With Quote
Old 9th September 2009, 09:37 PM   #9
jsn is offline jsn  United States
diyAudio Member
 
jsn's Avatar
 
Join Date: Sep 2004
Location: The Atomic City
Neat. I was thinking about remote controls a bit lately, and thought something like this might integrate really easily with a "lightspeed" style attenuator using LDRs controlled by the micro controller. Seems trivial to control the brightness of an LED via the voltage on a pin.

And while you are at it, you could configure each input to "remember" it's previous volume setting.

Just some ideas I wanted to share since I will probably never build my own remote controlled preamp

jsn
  Reply With Quote
Old 12th September 2009, 07:43 AM   #10
danzup is offline danzup  Romania
diyAudio Member
 
danzup's Avatar
 
Join Date: Oct 2007
Location: Bucuresti
Quote:
Originally Posted by jsn View Post
Neat. I was thinking about remote controls a bit lately, and thought something like this might integrate really easily with a "lightspeed" style attenuator using LDRs controlled by the micro controller. Seems trivial to control the brightness of an LED via the voltage on a pin.

And while you are at it, you could configure each input to "remember" it's previous volume setting.

Just some ideas I wanted to share since I will probably never build my own remote controlled preamp

jsn
Thanks for your thoughts man !
I have also tried an write soft for all variant include the not so hi-fi IC like : TDA7813 and associate.
But nothing like only resistor attenuator !
  Reply With Quote

Reply


Yet another Volume controlers and source selectionsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
source selector / volume hum in Aikido cbutterworth Tubes / Valves 1 28th March 2007 07:34 AM
Source for volume knobs? Alois Pass Labs 4 3rd July 2005 05:12 PM
IC Controlers for Class D Power stage frozenpod1 Class D 14 17th May 2005 03:25 PM
Swichable source and volume pot. Whats the best way? sounder Chip Amps 2 22nd September 2003 06:29 PM
detented volume pots... source? Mach_Y Parts 2 1st June 2003 05:23 PM


New To Site? Need Help?

All times are GMT. The time now is 08:56 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki