|20th September 2019, 11:38 PM||#1|
Join Date: Sep 2018
Finally! My SAKSA 85 up and running :-)
Around 4 months ago I had received my SAKSA module. I also had sourced a 300VA toroid transformer from Reichelt.de, so only an enclosure was missing. But the process of ordering it from Italy was not as straightforward as i had thought. After an initial contact all my mails with the dwg files they needed to drill all the holes remained unanswered for months till I thought the company was out of business. Well, it isn’t as finally at the end of July I received an answer. My mails had for some reason not reached them (???) and now they were closing for holidays till end of August….
Well, not to bore you with all this mishap, around ten days ago I received the enclosure and since a couple of days I am listening to the best power amp I have ever had!
For many many years a pair of NAD stereo power amps were (in two way active mode) powering my Manger speakers - not really high end, but not bad either (the NADs, not the Mangers, these German drivers are just wonderful). Before that I had 2 monstrous 400W Uher power amps, which finally failed and two attempts to get them repaired did not work out too.
The last couple of years I was upgrading the source components. (Philips CD 304 CD Player from around 1984 with two of the famous 1540 DACs, modified to non oversampling by Roman Groß, Sansui TU-X1 tuner, heavy plinth record player based on a 1980 or so Lenco L75 drive with 12“ Jelco arm and hana SL moving coil pickup (per lencoheaven.net), Ed Schilling's „the Truth“ line stage and a Nelson Pass B4 active crossover). Still, the sound of the system was not completely what it should be.
That has changed now.
The SAKSA apparently replaced the last weak link in my chain. It is still a bit early to give a final assessment. But one improvement is profound, very satisfying and immediately obvious: Whereas before loud musical passages like a fortissimo orchestra mushed up the sound and were shrill and hard on the ears, now the instruments stay separated, and the space does not collapse anymore. The clarity is amazing, the details and the space around the instruments is way better then ever before!
In summary, I have the feeling that the whole system is now without any obvious weak link. A life long road to the best possible (and affordable) audio reproduction has come to a point where I am satisfied and have no urge to improve anything any further. Well recorded music is pure bliss and friends comment that they have not heard recorded music any better.
The SAKSA 85 was the last missing piece in the puzzle! Thanks Hugh for this marvelous amp!
Oohps, I forgot: I have to order a second module! Because for my active system I need two!! The case I ordered is large enough for two modules,
I just wanted to test one just to be sure before ordering the second module (currently a cheap but decent little digital amp with 2x50 watts is powering the bass speakers as a stop gap and the SAKSA is driving the Manger transducers.) Hugh, if you read this, please take this as a purchase order for another SAKSA 85.
When I have listened more extensively I will report back. And post some photos…
Peter from Austria
Last edited by pan53; 23rd September 2019 at 05:49 PM.
|21st September 2019, 10:00 AM||#2|
Join Date: Sep 2001
Location: Melbourne, Australia
Thank you very much for your terrific post! I'm delighted your SAKSA hit the spot! I always thought it was one of my best amps, almost up with the Maya, and to here this affirmation I'm really very happy. You've made my day!
I will work on your second, Peter.... I have good stocks of them in inventory.
I have spent about 25 years on audio design, and I feel that at this point I'm really kicking goals. There is a lot of psychoacoustics in audio and it's much underestimated. And the spatial characteristics of amps are not well understood, sixty years down the track.
Aspen Amplifiers P/L (Australia)
|21st September 2019, 04:34 PM||#3|
Join Date: Sep 2018
A quick photo with my mobile phone. On top of the pile the little stop gap digital amp (SMSL SA50) powering the woofers, then the B4 active crossover, then the housing of currently one SAKSA. When the second module gets put in, all 4 LEDs will light up. Unfortunately no photos of the inside yet. I was just too eager to get it finished and playing to take photos during assembly. I will catch up on that when I get the second module.
At the moment Bach's Goldberg variations (solo harpsichord, Christiane Jaccottet playing) fill my living room.
OMG, never has it sounded so "there", so live and "actually in the room". Not much difference to the artist being really present with her instrument. I'll have to listen to my CD collection all over again. Hopefully my hearing will be up to it when I am 99 .....