• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Loudspeaker cable with NAKSA70

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi Hugh,

I'm changing my setup at the moment and with that I have to aquire some new loudspeaker cable. I have my I on supra-ply 3.4S but I was wondering if this is a good choice to be used with my NAKSA70 because it is a high capacitance cable. Mine would be around 22nF load to the amp. Is the NAKSA70 stable into that load or should I get something else?
 
Thanks for your answer,

I'm not going to spend much on cables indeed. I have been using cable talk 3.1 biwire for 25 years and it was allways just fine. Now I need some longer lengths and the Supra cable is cheap enough to try. I will report back if I hear any difference whatsoever. I don't expect much if any at all.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.