|23rd October 2017, 07:15 AM||#12|
Join Date: Jul 2003
I've done some simple searching and have come up with some links for you to look at to get an idea of what your choices might be.
If you want to go with just a low cost standard replacement, then tubestore or tubedepot has 6es8's for under $10 ea.
The first link below is for NOS 6es8. There are several choices and various price ranges. I've never bought from the vendor but they do offer a lot of tubes.
The 6es8 is not a common tube and choices are limited.
However, the 6DJ8 family has lots of choices, and they can get pricey in a hurry. You can look at the links to get an idea. I can vouch for Andy at vintage tube services as I bought from him a dozen or so years ago. He has a lot beyond the pdf list and likes a chat. He only does business on the phone too.
Lastly, I have found that spending a lot of money on tubes for the GK-1 is not really the best value. Though then again I found the 7308's I got from Andy to be a little bit nicer sounding than the original. I recall that I spent $65 ea. on the tubes. They were Amperex and look nice.
The NOS 6es8 choice has intrigued me as that might represent a good value if the tube price is not over the top. It's what Hugh designed the circuit to use and perhaps the NOS ones may offer some value over the $6 ones. But I never did buy any so cannot offer anything more than that opinion.
Start saving for a pair of Maya modules. They would be good value with the W22E drivers in your Orions.
|23rd October 2017, 01:35 PM||#14|
Join Date: Sep 2004
Thanks to all of you for your quick, helpful, and friendly help. I'll get busy following up leads, let you know what I ended up buying, and how it sounds.
I feel like I've been to a reunion of old friends, minus the beer and colorful surroundings of course. / Pete
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|replacing original headphone drivers in bluetooth 8$ headset?||realflow100||Headphone Systems||2||20th April 2017 06:35 AM|
|Manley 440: Tubes red cherry after replacing old tubes with new ones||fmacarty||Tubes / Valves||8||9th January 2013 03:44 AM|
|Replacing an original XO & ceramics question||nad||Digital Source||6||7th June 2011 01:15 PM|
|Replacing Tubes||UKTwister||Tubes / Valves||1||22nd July 2004 12:23 AM|
|Original Lectron EL34 tubes?||webercarbmann||Tubes / Valves||2||21st November 2002 05:41 PM|
|New To Site?||Need Help?|