• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Paris MC PCB

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Not personally, Taffy.

But plenty of my customers have. Perhaps foolishly, I don't look over my shoulder at other products; it's almost a religion. For me, the design exercise is everything.

Correction: My Paris is simply a head amp, no EQ, just a gain block, around 25 times, for low output MC cartrides. Zin is variable, Zout is around 500R.

It was tested by Joachim Gerhard in this forum who found the noise figure to be around -142dB, best he'd seen. That's pretty good, I was pleased.

Cheers,

Hugh
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.