Go Back   Home > Forums > > >

AKSA Builders of market proven kits and modules at sound quality to rival the best in high end

Reply
 
Thread Tools
Old 29th August 2011, 05:06 AM   #311
AKSA is offline AKSA  Australia
diyAudio Member
 
Join Date: Sep 2001
Location: Melbourne, Australia
OK, things are going well. I've collated all names, monikers, addresses, and payment record and have a list of unpaid to date which I will publish now to remind people I'm now ready to mail out the boards. I have them all ready to roll, and Richard and I will despatch the majority in the next two days.

I would like to thank those who have taken the leap of faith and paid to this point. I appreciated your confidence and trust, and promise you will not be disappointed.

The guys listed below have not yet paid, or, at least, payment not received through paypal to my aspen01 -at- optusnet.com.au email address. Of course, some may have changed their mind, that's cool, but please let me know as others who missed out would like their boards!! (the buy is oversubscribed, I'm astonished to say!!).

2+P Anthony Mills Gold Coast Australia
2+P Dinesh (aka Chlorofille) Christchurch New Zealand
2 Chris Powell Mosman NSW Australia
2 Sonnya (?) City (?) Denmark
4+P Jozua (aka Jozua) Cape Town South Africa
2+P Sparkey (Brian ?) Melbourne Australia
2 Kannan_S Austin TX USA
2+P VZS (Zsolt ?) Cluj-Napoca Romania
2+P Halcon83 City? USA


This comes to 20 pcbs (one for each channel).

Costs, to recap, are:

$AUD50 for two pcbs (bare) with shipping.
$AUD60 for two pcbs (smd mosfet VAS mounted and T1/T3 as well for each channel) with shipping.

Shipping is to anywhere in the world. Tallinn, Tel Aviv and Tashkent are all included in the destinations, so you need not worry where you live!!

All in all, a very good experience for me so far, and, I think, a VERY good amp and pcb!

Cheers,

Hugh
__________________
Aspen Amplifiers P/L (Australia)
www.aksaonline.com

Last edited by AKSA; 29th August 2011 at 08:30 AM.
  Reply With Quote
Old 29th August 2011, 08:19 AM   #312
vitalica is offline vitalica  Europe
diyAudio Member
 
vitalica's Avatar
 
Join Date: Feb 2005
2+P Vitalica Bucharest Romania - give up
2+P Anthony Mills Gold Coast Australia
2+P Dinesh (aka Chlorofille) Christchurch New Zealand
2 Chris Powell Mosman NSW Australia
2 Sonnya (?) City (?) Denmark
4+P Jozua (aka Jozua) Cape Town South Africa
2+P Sparkey (Brian ?) Melbourne Australia
2 Kannan_S Austin TX USA
2+P VZS (Zsolt ?) Cluj-Napoca Romania
4+P Vitalica Bucharest Romania - I paid $ 120
2+P Halcon83 City? USA

Thanks!


Fixed, Vitalie!! Thank you for pointing this out.....

You should have my personal email, too, thanking you for your payment.

Hugh

Last edited by AKSA; 29th August 2011 at 08:31 AM.
  Reply With Quote
Old 29th August 2011, 09:37 AM   #313
AndrewT is offline AndrewT  Scotland
R.I.P.
 
Join Date: Jul 2004
Location: Scottish Borders
Hi Aksa,
you omitted me from the "unpaid" list, but PayPal now activated


Andrew,

I was being 'nice'!!

Mistake rectified, thank you for payment,

Hugh
__________________
regards Andrew T.

Last edited by AKSA; 29th August 2011 at 10:07 AM.
  Reply With Quote
Old 29th August 2011, 02:52 PM   #314
AKSA is offline AKSA  Australia
diyAudio Member
 
Join Date: Sep 2001
Location: Melbourne, Australia
Default Unpaid List

Here is the list of unpaid orders:

2+P Anthony Mills Gold Coast Australia
2+P Dinesh (aka Chlorofille) Christchurch New Zealand
2 Chris Powell Mosman NSW Australia
2 Sonnya (?) City (?) Denmark
4+P Jozua (aka Jozua) Cape Town South Africa
2+P Sparkey (Brian ?) Melbourne Australia
2 Kannan_S Austin TX USA
2+P VZS (Zsolt ?) Cluj-Napoca Romania (pending payment in one week)
2+P Halcon83 City? USA

Please pay when you are ready, guys, I will immediately send out the pcbs.
Tomorrow Richard and I will be despatching all paid orders, so you can expect quick transit.

Cheers,

Hugh

PS Mike, not sure what happened to your post, something went wrong, my apologies.....
__________________
Aspen Amplifiers P/L (Australia)
www.aksaonline.com
  Reply With Quote
Old 30th August 2011, 05:21 AM   #315
sonnya is offline sonnya  Denmark
diyAudio Member
 
sonnya's Avatar
 
Join Date: Oct 2001
Location: Denmark
Quote:
Originally Posted by AKSA View Post
OK, things are going well. I've collated all names, monikers, addresses, and payment record and have a list of unpaid to date which I will publish now to remind people I'm now ready to mail out the boards. I have them all ready to roll, and Richard and I will despatch the majority in the next two days.

I would like to thank those who have taken the leap of faith and paid to this point. I appreciated your confidence and trust, and promise you will not be disappointed.

The guys listed below have not yet paid, or, at least, payment not received through paypal to my aspen01 -at- optusnet.com.au email address. Of course, some may have changed their mind, that's cool, but please let me know as others who missed out would like their boards!! (the buy is oversubscribed, I'm astonished to say!!).

2+P Anthony Mills Gold Coast Australia
2+P Dinesh (aka Chlorofille) Christchurch New Zealand
2 Chris Powell Mosman NSW Australia
2 Sonnya (?) City (?) Denmark
4+P Jozua (aka Jozua) Cape Town South Africa
2+P Sparkey (Brian ?) Melbourne Australia
2 Kannan_S Austin TX USA
2+P VZS (Zsolt ?) Cluj-Napoca Romania
2+P Halcon83 City? USA


This comes to 20 pcbs (one for each channel).

Costs, to recap, are:

$AUD50 for two pcbs (bare) with shipping.
$AUD60 for two pcbs (smd mosfet VAS mounted and T1/T3 as well for each channel) with shipping.

Shipping is to anywhere in the world. Tallinn, Tel Aviv and Tashkent are all included in the destinations, so you need not worry where you live!!

All in all, a very good experience for me so far, and, I think, a VERY good amp and pcb!

Cheers,

Hugh
I will pay later today.
  Reply With Quote
Old 30th August 2011, 08:23 AM   #316
AKSA is offline AKSA  Australia
diyAudio Member
 
Join Date: Sep 2001
Location: Melbourne, Australia
Default FIRST MAILOUT TODAY 30 AUG 11

Folks,

The first batch were mailed out today, the second will be tomorrow. The following orders were despatched by plain white envelope today:

S PAID 2+P JoMo Adelaide SA Australia
S PAID 2+P Ian Finch Coffs Harbour NSW Australia
S PAID 2+P Ken Lewis LA USA
S PAID 4+P Ron Russell (aka ron.Russell) Kent UK
S PAID 2+P John Kenny (aka jkenny) Dublin Ireland
S PAID 2+P Francis Morrin (aka Woodturner_Fran) Dublin Ireland
S PAID 2+P Vitalica Bucharest Romania
S PAID 2+P Keith Correa Mumbai India
S PAID 2+P Igor Polyakov Newark California USA
S PAID 2+P Steve (aka SRH) Whangarei New Zealand
S PAID 2+P Colin Spargo (aka Col_S) Thirroul NSW Australia
S PAID 2+P Danny (Danny_66) Lierde
S PAID 2+P Aidan Burrows (aka Chalkandtalk) Warrington England UK
S PAID 4+P Woody1911a1 (?) Marblehead , MA USA
S PAID 4+P George Cherhit Sacramento CA USA
S PAID 2+P Tore Martensson Malmoe Sweden
S PAID 2+P Steve Harrison Rock Springs WY USA
S PAID 2+P Doan Chuong (NCC) Hanoi Vietnam
S PAID 2+P John Hambek (aka SoundCzech) Fort Worth TX USA

If your name is NOT on this list, it's because I have Round #2 to go, tomorrow. This makes 18 packages, since Francis Morrin and John Kenny are in the one package, addressed to John in Dublin.

As you can see, all orders in this list include parts. The smd mosfet VAS is mounted with flux removed, and the boards are side by side, attached to each other with sticky tape, and surrounded by bubble pack. The additional parts, 2 x 2SK170 and 2 x DN2530, are small TO92s attached to the two boards with sticky tape, and the entire shebang enclosed with a parts list and a short note to each person.

I would like to thank Richard Grant for his terrific input during this process. It's quite exacting and fairly tedious, so another person makes it all a pleasure.

It's sent Air Mail and should transit within 10 days to most locations. If it's three weeks or so and you haven't received it, let me know please.

More tomorrow!!

Cheers,

Hugh
__________________
Aspen Amplifiers P/L (Australia)
www.aksaonline.com
  Reply With Quote
Old 30th August 2011, 11:57 AM   #317
vitalica is offline vitalica  Europe
diyAudio Member
 
vitalica's Avatar
 
Join Date: Feb 2005
Quote:
Originally Posted by AKSA View Post
Folks,

The first batch were mailed out today, the second will be tomorrow. The following orders were despatched by plain white envelope today:

S PAID 2+P JoMo Adelaide SA Australia
S PAID 2+P Ian Finch Coffs Harbour NSW Australia
S PAID 2+P Ken Lewis LA USA
S PAID 4+P Ron Russell (aka ron.Russell) Kent UK
S PAID 2+P John Kenny (aka jkenny) Dublin Ireland
S PAID 2+P Francis Morrin (aka Woodturner_Fran) Dublin Ireland
S PAID 2+P Vitalica Bucharest Romania
S PAID 2+P Keith Correa Mumbai India
S PAID 2+P Igor Polyakov Newark California USA
S PAID 2+P Steve (aka SRH) Whangarei New Zealand
S PAID 2+P Colin Spargo (aka Col_S) Thirroul NSW Australia
S PAID 2+P Danny (Danny_66) Lierde
S PAID 2+P Aidan Burrows (aka Chalkandtalk) Warrington England UK
S PAID 4+P Woody1911a1 (?) Marblehead , MA USA
S PAID 4+P George Cherhit Sacramento CA USA
S PAID 2+P Tore Martensson Malmoe Sweden
S PAID 2+P Steve Harrison Rock Springs WY USA
S PAID 2+P Doan Chuong (NCC) Hanoi Vietnam
S PAID 2+P John Hambek (aka SoundCzech) Fort Worth TX USA

If your name is NOT on this list, it's because I have Round #2 to go, tomorrow. This makes 18 packages, since Francis Morrin and John Kenny are in the one package, addressed to John in Dublin.

As you can see, all orders in this list include parts. The smd mosfet VAS is mounted with flux removed, and the boards are side by side, attached to each other with sticky tape, and surrounded by bubble pack. The additional parts, 2 x 2SK170 and 2 x DN2530, are small TO92s attached to the two boards with sticky tape, and the entire shebang enclosed with a parts list and a short note to each person.

I would like to thank Richard Grant for his terrific input during this process. It's quite exacting and fairly tedious, so another person makes it all a pleasure.

It's sent Air Mail and should transit within 10 days to most locations. If it's three weeks or so and you haven't received it, let me know please.

More tomorrow!!

Cheers,

Hugh
Hi Hugh,

Why P+ 2?
I paid $ 120 for P+4.
  Reply With Quote
Old 30th August 2011, 12:50 PM   #318
AKSA is offline AKSA  Australia
diyAudio Member
 
Join Date: Sep 2001
Location: Melbourne, Australia
Quite right Vitalica, my mistake, I am sorry.

With all these orders mistakes happen.

I will send two more to you tomorrow.

Folks,

I am very sorry but I have had to forgo sending the mica caps; I do not have stock and had not realised. OTOH, the shipping cost me much more than I had expected as anything to Europe costs about $USD15.50, and I'm frustrated all round.

You need only two 33pF silver micas for lag compensation; no phase lead required unless you have an electrostatic speaker.

If anyone else has an issue with my mailout, please PM me. Any mistakes are just that; there is no intention to dupe anyone.

Hugh
__________________
Aspen Amplifiers P/L (Australia)
www.aksaonline.com
  Reply With Quote
Old 30th August 2011, 01:03 PM   #319
vitalica is offline vitalica  Europe
diyAudio Member
 
vitalica's Avatar
 
Join Date: Feb 2005
Quote:
Originally Posted by AKSA View Post
Quite right Vitalica, my mistake, I am sorry.

With all these orders mistakes happen.

I will send two more to you tomorrow.

Folks,

I am very sorry but I have had to forgo sending the mica caps; I do not have stock and had not realised. OTOH, the shipping cost me much more than I had expected as anything to Europe costs about $USD15.50, and I'm frustrated all round.

You need only two 33pF silver micas for lag compensation; no phase lead required unless you have an electrostatic speaker.

If anyone else has an issue with my mailout, please PM me. Any mistakes are just that; there is no intention to dupe anyone.

Hugh

Thanks ,Hugh

Best regards,
Vitali
  Reply With Quote
Old 30th August 2011, 01:08 PM   #320
AndrewT is offline AndrewT  Scotland
R.I.P.
 
Join Date: Jul 2004
Location: Scottish Borders
Builders may not need any silvered mica capacitors.
Try the amps without added reactive load compensation.
__________________
regards Andrew T.
  Reply With Quote

Reply


Swordfishy/ASPEN FETZILLA power ampHide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Aspen Maya Vegking AKSA 10 25th February 2020 12:04 AM
Aspen Headphone Amp AKSA AKSA 1151 25th April 2019 07:11 AM
DIYaudio to become new Aspen Forum AKSA AKSA 13 2nd May 2011 08:04 AM
Sachiko/aspen slab rmcelroy Full Range 0 9th March 2011 07:34 PM
Aspen HAKSA Group Buy AKSA AKSA 74 16th November 2010 06:17 AM


New To Site? Need Help?

All times are GMT. The time now is 12:55 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio
Wiki