• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Naska

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Hi Mal,

Nice to see you here!!

You can cut up the pcb to make modules, but then you have to make your own power supplies!! It is a fallacy to assume a monobloc will always sound better; it depends entirely on the topology. The NAKSA is made as monobloc amps electrically anyway!

Hope this answers your question!

Hugh
 
Hi Mal,

Nice to see you here!!

You can cut up the pcb to make modules, but then you have to make your own power supplies!! It is a fallacy to assume a monobloc will always sound better; it depends entirely on the topology. The NAKSA is made as monobloc amps electrically anyway!

Hope this answers your question!

Hugh
Hi Hugh
I'm after mono's easier to place in the room with the other amps.

Cheers
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.