Does anyone have the dwgs. for Zaph's Tang Bands?
I'm finally getting around to building these but his Tang Band page has been taken down.
TIA,
cj.9
I'm finally getting around to building these but his Tang Band page has been taken down.
TIA,
cj.9
Hello,
Check the archives page in a few moments. I'm going to post zipfiles of a couple of the archived projects.
John
Check the archives page in a few moments. I'm going to post zipfiles of a couple of the archived projects.
John
I'm glad you're putting the TB article back Zaph as it's seem to be a popular project at the moment. I'm building a pair myself too 😀
PS. Your blog makes for a good read.
Vikash said:
Only if you have a good sense of humor. 😀
I do believe the Hi-Vi B3S system sounds a little better, but the TB 871 has been so popular that I don't ever see it going away.
Now now, I'm not going to let you hide from your comment in the original article about the TB being the best fullrange driver you'd used - ever. 😉
It was the availability of the Hi-Vi drivers (or lack of) that made my decision between the two in the end. That will probably be a factor for DIYers in Europe especially.
I've had to adapt the enclosure slightly to account for the 18mm wood we have here. I'm hoping that won't be a problem with the xover.
Quite looking forward to hearing what all the fuss is about with these little drivers 😉
It was the availability of the Hi-Vi drivers (or lack of) that made my decision between the two in the end. That will probably be a factor for DIYers in Europe especially.
I've had to adapt the enclosure slightly to account for the 18mm wood we have here. I'm hoping that won't be a problem with the xover.
Quite looking forward to hearing what all the fuss is about with these little drivers 😉
- Status
- Not open for further replies.