yahama m60

[comish4]

can anyone tell me what voltage light goes in the front panel of this amp. i put in some 12 v but they still seem a little dim thanks in advance Tom

 

[boywonder]

I cannot comment on the M60 but the M2/M4/C4 have 12V lamps.

I have been using 12V lamps from radio shack for replacements P/N 272-1141. They are very close to the OEM bulbs.

You can also use LEDs with a dropping resistor, although the colors won't match the incandescents.

 

[pdm4606]

lamp voltage

The 8.6 volt grain of wheat bulb is real popular on many overseas equipment.

Paul

 

[Bigred]

The three lamps are 8V/150mA

 

[pdm4606]

8v lamps

You're right.
Thanks for the input.

Paul