Before I solder up the BrianGT boards I just got in the mail thought I'd query the field to see if I could score some Mini boards.
Kindly email me with any prospects
Thank you Thank you!!!🙂
Kindly email me with any prospects
Thank you Thank you!!!🙂
By Mini-A, are your refering to the SMD boards? The BrianGT boards pretty small and offer a balanced implementation. I think the SMD boards were single ended only.
The boards you have are awesome and can be wired as mini's with the FET's on the main board.
The boards you have are great and you will not be disappointed.
-David
The boards you have are awesome and can be wired as mini's with the FET's on the main board.
The boards you have are great and you will not be disappointed.
-David
dw8083 said:
Indeed they are awesome!!My thought was to save them for full blown use. My current needs are unbalanced in/out low wattage. Seems a shame to utilize 2/3 of the capability.
I think there were some thru hole boards made -which I would prefer as never done SMD stuff .
ANYBODY GOT THEM???
E mail me and I'll send you some gerber files. Updated version of these.
http://www.diyaudio.com/forums/showthread.php?s=&threadid=19246
http://www.diyaudio.com/forums/showthread.php?s=&threadid=19246
I have a set of amp boards with a few resistors and couple Panasonic FC caps soldered in.
Also have a fully populated PS board using Solen 2.7mH inductors and Sonicap 3.3uf bypass caps. 44000uf of Panasonic 35 volt caps per rail.
And an Antek 18-0-18 300vA transformer.
None of it has seen power.
Email me if interested.
Also have a fully populated PS board using Solen 2.7mH inductors and Sonicap 3.3uf bypass caps. 44000uf of Panasonic 35 volt caps per rail.
And an Antek 18-0-18 300vA transformer.
None of it has seen power.
Email me if interested.
- Status
- Not open for further replies.