Dear All,
I have a Mark Levinson No 26S on my repair bench wich has a dead channel.
Mechanically it is a hell to disassemble and it's very hard to do decent measurements without doing that. First, i'd like to see what i'm getting into and if i can't trace the problem to a source - any source - before starting putting hours in it. A schematic is usually everything i need to be able to do that.
So: since DIYaudio has been very helpful with earlier questions: does anybody have the service manual of this beauty?
i'll post some pics soon.
I have a Mark Levinson No 26S on my repair bench wich has a dead channel.
Mechanically it is a hell to disassemble and it's very hard to do decent measurements without doing that. First, i'd like to see what i'm getting into and if i can't trace the problem to a source - any source - before starting putting hours in it. A schematic is usually everything i need to be able to do that.
So: since DIYaudio has been very helpful with earlier questions: does anybody have the service manual of this beauty?
i'll post some pics soon.
Schematic
Have you tried..........'hifi manuals'?
Freebie downloads, max 3 per day.
I repaired a Levinson a while back, turned out to be a single loose strand of copper wire. Presumably it had been there since it came out the factory.
Good luck
Have you tried..........'hifi manuals'?
Freebie downloads, max 3 per day.
I repaired a Levinson a while back, turned out to be a single loose strand of copper wire. Presumably it had been there since it came out the factory.
Good luck
Sorry, i don't know what was wrong with it, haven't repaired it.
Still many thanks for giving attention to this short thread.
Still many thanks for giving attention to this short thread.
- Status
- Not open for further replies.
- Home
- Source & Line
- Analog Line Level
- [WANTED] Mark Levinson No 26S Service Manual/Schematic