• The Vendor's Bazaar forum is for commercial offers and transactions. Only unmoderated members can post here.

    diyAudio provides this forum for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members. Use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Various project PCB's, MOSFETS, power IC etc etc, all in one box, The Netherlands

Hi All,

After serveral years I finally cleared out some DIYaudio stuff that I had laying around for a longggg time. These items can be picked up in Leiden, The Netherlands for small fee that does not have to be anywhere near the price I paid for them. Most importantly I would be nice knowing some parts will get used by someone...


-2x Aleph-X PCBs
-2x PowerClone PCBs, including 6x LM3875TF
-2x IC Poweramp PCBs incl 2x LM4780TA and rectifiers
-2x IC Poweramp PCBs, without any parts
-2x GainClone PCBs incl 2xLM3875TF
-4x Aleph X PCBs + 8x Aleph CCS PCBs, no parts
- some unknow PCB's which look like a MC- pre -pre headamp, " phase optimized", and " ERNShow.com"
-4x Aleph 30 PCBs
- DAC PCB for 4x-PCM663PPK, CS8412/8414, SM5842 , dac-IC's
-JFET-BOZ PCB, most parts allready soldered, incl 2SK170 and 10uF AEON 10uF Truecap
-4x LM3886 gainclone PCB incl 4x LM3886T
-4x power regulator PCB.s incl 4x 63V, 10 000uF caps Rubycon
-2x gainclone PCb incl 2x LM3875TF
-some unknow PCB, which I believe is a Psslab DIY project for a Power JFET amplifier, including 2 power JFETS
- 2x power suply PCB, inlcu 16x ast rectifiers and 12x 1000uF caps
-Pass B1 BUF inlcuding power caps and 2Sk170's
-Gilmore LITE headphone amp PCB
-Power Supply PCB , I think for a Pass BOZ, incl 200V, 1200uF caps
-IRFP240 power MOSFETS, I count 56x
-power rectifiers, "CQ549, U860", I count 29x
-4x TDA7266 power amp IC's
-2x LM3875 PCB's incl LM3875TF
-4x Chipamp.com gainclone PCB's incl 4x LM1875 and 2x poewr supply PCB
-3x stereo headphone/preamp PCB for opamps, I believe these are from headfi.org, and are a pocket headphone amp prject PCB for 9V supply
  • 2x Pass-Aleph3 PCBs from www.hifi2008.cn (?)
  • 2x original Nelson Pass A40 project PCB's from a old article in an old magazine
-35x 2N5877 power BJT, maybe for the Nelson Pass A40?
-Pass SOBOZ preamp PCB, all parts solered, incl toroid transformers and power supply PCB.
-inverse RIAA filter, 12 Ohm output
  • 2x Alesis Bi-amping poweramp (2x LM3886 + 2x LM2386 (?) )
  • Pass BOZ, all parts soldered incl toroid transformer
  • 230V to 2x 15V, 1A toroid transformer
  • 230V to 2x 12V, 5A toroid transformer, two of them
  • 230V to 15,17,19,21V , 15VA toroid potted transformer
  • 220V to 2x 30V toroid transformer


in total
7 toroid transformers
20 gainclone PCB's incl power IC chips
56 power MOSFETS
18 PASS project PCBs
etc....

all in one box to go.






-
 

Attachments

  • IMG_2102.JPG
    IMG_2102.JPG
    378.9 KB · Views: 143