Hi all,
I am keen to build variable speed cdp using variable spped clock generator for retrofitting to standard cd players for DJ application.
I have seen this done sucessfully.
Suitable circuits anybody?
Thanks , Eric McMillan.
I am keen to build variable speed cdp using variable spped clock generator for retrofitting to standard cd players for DJ application.
I have seen this done sucessfully.
Suitable circuits anybody?
Thanks , Eric McMillan.
Hi there,
The dutch magazine Elektor had a publication for Philips CD players back in december 1988. It works with the SAA7210/SAA7220 chipset. There was a 11.2896 and a 4.2336 MHz version. Regulation -20% to +15% in 0.5% steps.
Included was a display.
Elektor PCB's might be found at : www.melieste.nl but 88 is quite old. Elektor itself: www.elektuur.nl.
Good luck, Guido
The dutch magazine Elektor had a publication for Philips CD players back in december 1988. It works with the SAA7210/SAA7220 chipset. There was a 11.2896 and a 4.2336 MHz version. Regulation -20% to +15% in 0.5% steps.
Included was a display.
Elektor PCB's might be found at : www.melieste.nl but 88 is quite old. Elektor itself: www.elektuur.nl.
Good luck, Guido
- Status
- Not open for further replies.