Hello,
Just thought I would show a pic of my semi-finished subwoofer enclosure. It is designed around a Peerless 12" XLS & 2 12" Peerless Passive Radiators. 50 Litres net internal volume. It will be powered by an Adire ADA1200 (I will keep the gain DOWN).
The cabinet is constructed out of 2 layers of 3/4" mdf that are glued together with polyurethane adhesive. The cabinets sides along with all bracing is then secured using West System 2 part marine epoxy. The I-Beam style Baltic Birch vertical brace (shown) is routed into the top & bottom panels; the post is maple laminated with Baltic Birch. It is ridgid enough, I hope...
This is a great hobby, special thanks to Cal Weldon for getting me interested in it....
HTR
Just thought I would show a pic of my semi-finished subwoofer enclosure. It is designed around a Peerless 12" XLS & 2 12" Peerless Passive Radiators. 50 Litres net internal volume. It will be powered by an Adire ADA1200 (I will keep the gain DOWN).
The cabinet is constructed out of 2 layers of 3/4" mdf that are glued together with polyurethane adhesive. The cabinets sides along with all bracing is then secured using West System 2 part marine epoxy. The I-Beam style Baltic Birch vertical brace (shown) is routed into the top & bottom panels; the post is maple laminated with Baltic Birch. It is ridgid enough, I hope...
This is a great hobby, special thanks to Cal Weldon for getting me interested in it....
HTR
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.