ST1700B manual or schematics

[Elvee]

Hi,

Does someone have the service manuals, or at least the schematics for this Sound Technology distortion meter?
There is little to be found on the WWW from this maker.
Thanks,
LV

 

[stoN_Cold]

Here:

Regards zeoN_Rider

 

[stoN_Cold]

& :

 

[stoN_Cold]

Sorry, again:

 

[Elvee]

Waow! That's great!

Thanks a lot, Sir zeoN_Rider

 

[stoN_Cold]

Waow! That's great!

Thanks a lot, Sir zeoN_Rider

Little step for men, & big for bla,bla 😀

Regards zeoN_Rider

 

[analogue tech]

Elvee

I see you have the schematics now. I have the service manual with the alignment, operation, theory..... Unfortunately it's not in PDF format and would have to be scanned. If you need it let me know. it's about 40 pages.

I'm looking for the service manual for Tascam CDRW2000 and can't find one.

 

[stoN_Cold]

I have the service manual with the alignment, operation, theory.

Me too! 😉

Regards zeoN_Rider

 

[analogue tech]

zeonrider

Does "me too" mean you're looking for a service manual for the CDRW2000 or want a copy of the ST1700B manual?

If it's the CDRW2000 manual I found someone with it >>> Vintage Audio Manuals - Your All-In-One place to shop for Vintage Audio Owner's Manuals, Service Manuals, Schematic Diagrams and Brochures <<< but he is not answering emails. Maybe you will have better luck.

If you want a copy of the ST1700B manual let me know and I will begin the scanning.

 

[Elvee]

Elvee

I see you have the schematics now. I have the service manual with the alignment, operation, theory..... Unfortunately it's not in PDF format and would have to be scanned. If you need it let me know. it's about 40 pages.

I'm looking for the service manual for Tascam CDRW2000 and can't find one.

Thanks for this kind offer.

I asked for the documentation because my unit has developed a number of "soft" faults with time, resulting mainly in a higher noise floor.

I had been able to fix hard faults, such as PSU problems, but the soft ones are more elusive, and difficult to track without support.

Now that I have the schematics, I'll be able to go deeper, and hopefully isolate the causes of problems (bad contacts I think).
If this is not successful, I may need to go through the whole calibration process, and in this case, I'll ask for your help.

Sorry for your Tascam, but I cannot help there.

 

[stoN_Cold]

zeonrider

Does "me too" mean you're looking for a service manual for the CDRW2000 or want a copy of the ST1700B manual?

No, I have too complet service manual with the alignment, operation, theory.

Sorry🙂

Regards zeoN_Rider

 

[ronaldw441]

You can download the complete manual at:

http://stancurtis.com/Soundtech/Sound Tech 1700B Manual.pdf

 

[dsbrostoff]

Zeonrider,
Even though this string is quite old, I was curious if you ever pdf'd the service manual for the ST1700B. I am about to take delivery of one, and it has high residual distortion. While I assume it is related to caps, a service manual would be beneficial. Thanks for your thoughts
Dan

 

[ronaldw441]

Sound Technology ST1700B

Manual and other interesting ST stuff here;

Stan Curtis, Engineer, Sound Technology instruments, download service manuals

Also, check out;

Sound Technology 1700B and 1701A... busted! - AudioKarma.org Home Audio Stereo Discussion Forums

for a thread on repair.

 

[Chris Daly]

A slightly easier to read the schematic version, that helps by presenting diagrams not on their side pdf is here: http://www.tubebooks.org/Books/Atwood/Sound Technology 1979 1700AB.pdf