My old Soundstream Granite amps speaker output levels are very different.
I tested all channels with many heads, and all heads from all oututs, but still the same.
The biggest difference there is 5-6 channel.
What could be the error in amplifier?
Thanks for the answers!
I tested all channels with many heads, and all heads from all oututs, but still the same.
The biggest difference there is 5-6 channel.
What could be the error in amplifier?
Thanks for the answers!
Attachments
Are 5 and 6 equal?
Are you feeding the inputs for each channel directly?
Is this a new problem (were 5 and 6 equal to the others then suddenly lower)?
Do you have all channels set to full range?
Are all gain controls set to the fully clockwise position?
Are you feeding the inputs for each channel directly?
Is this a new problem (were 5 and 6 equal to the others then suddenly lower)?
Do you have all channels set to full range?
Are all gain controls set to the fully clockwise position?
5 and 6 the most different!
But the 1-2, and 3-4 channels have noticeable different.
Yes, at first I thought the problem in HU outs.
But no....
Yes, set full range and stereo mode.
Yes, i turned max position all gain controls.
Thanks!
But the 1-2, and 3-4 channels have noticeable different.
Yes, at first I thought the problem in HU outs.
But no....
Yes, set full range and stereo mode.
Yes, i turned max position all gain controls.
Thanks!
- Status
- Not open for further replies.