Rockford Punch 45

Hello have an older Punch 45 before they had fuses.

It had a shorted output. I removed the shorted output and the amp powers up and produces audio on the remaining good channel.

Dont have a schematic need to know what the burned resistor is next to the white power wire. I assume it burned while the amp was drawing current from being powered with a shorted output.

Can I replace MTP12P05 with IRF9540?
Can I replace MTP3055A with IRF540?

I have 200 MTP3055E in stock not sure if they are the same as the "a" version?

I can still order the MTP12P05 but I think I would rather use the 540/9540 if they will work in this amp??


  • Punch 45 resistor 001.jpg
    Punch 45 resistor 001.jpg
    1,006 KB · Views: 138