rockford Fosgate XV-2 3way Crossover

[Dr Zeus]

I got this active crossover from a guy at work who got it from another guy. The other guy took it apart and pulled out the resistor packs so now the new owner doesnt know how to get it working. Hence the guy at my work gave this to me to try and fix.

There nothing broken per say on this unit, only I dont know how the resistor packs should be installed. I found very little information on this old-school piece of Rockford history; perhaps this was around back in "The Punch" days.

Its in excelent condition; 10/10 and is only missing the power plug.

I'm using my frequency generator as input, and my mini-amplifier at the outputs.

 

[Dr Zeus]

I did get a response from Rockford Fosgate on the manual for this crossover. Its a larger PDF, so I zipped it up and attached it to this thread for any future use / searching.

This manual was not available on Rockford's website from what I could find.

Unfortunately this manual says that this crossover is only 12db per octive. Figured

 

[Riveted1]

I know this is old, but thanks for posting the manual!

 

[mspalinger]

Hello, would you be interested in selling that xv-2? I have a project that can use that unit. Please let me know. Thanks

 

[mspalinger]

xv-2

It's funny, I've been looking for one of those for awhile now and here you have one with the frequency chips I could use also would your buddy be interested in selling that piece? Mike

 

[microsoftwarrior]

thanks for the manual!, I had this sitting in a box for 25 years, just getting to install it now, lol