Replacement cap questions...

I am repairing my dad's no 27, as I have it apart I wanted to replace the electrolytics that are close to heat sources, such as those resistors that seem to get really hot.

Any ways, one of them is a 10uF 25VDC 105 deg C BRI 672D series cap. I can't find this same cap from the manufacturer any more, however, I have found other caps that are rated to 105 deg C and 8000 hours.

I know the 672D series was a starting/ballast cap, but, are they any specifics that I should be looking for?

Thanks!

eb