I received this amp to repair and it appears to have missing parts. I amp pretty sure this is untouched. I have pics to illustrate. 1) Shouldn't there be a trim pot on the far right channel. 2) Am I missing r760?
The power supply 1000uFcaps are swollen on one rail. I pulled the c2061 and installed something close as a temp to see if the amp would power up. He tells me this amp was working and he purchased it new.
Brian
The power supply 1000uFcaps are swollen on one rail. I pulled the c2061 and installed something close as a temp to see if the amp would power up. He tells me this amp was working and he purchased it new.
Brian
Attachments
It's probably a factory defect. The pots are likely for DC offset. If so and the DC offset isn't excessive, it may not be a significant problem.
Confirm that the positive and negative rails are equal. If one is significantly higher, you may have a problem in one channel.
Confirm that the positive and negative rails are equal. If one is significantly higher, you may have a problem in one channel.
- Status
- Not open for further replies.