Power Transformer Hafler needed

[schillg11]

Hi all,

i am looking for a power transformer (international version) from a Hafler poweramp.It can be from a DH-120, SE-120 or from a 9130, but it must be the international version, supporting 220V and/or 240V AC primary.

PM please, if you have such a transformer available.

BR
Günni

 

[john65b]

I think I may have one from a Hafler Pro 2400...which MAY be same as DH-120

 

[schillg11]

Thanks JohnB for your offer.
It would be helpful, if you could check the size

here are the measurements:
length 5,5 "
wiidth 3,5 "
height 2,8 "

and the secondaries should be about 38- 40 VAC

Thanks and best regards
Günni

 

[john65b]

What is your location? If you are in Germany it is likely too expensive to ship - let me know.

 

[schillg11]

thanks John65b for your answer.
After checking the costs of shipping, i will try to find a toroid transformer here in Europe. I doesnt make sense to pay more than $100 for a packet with 2 kg only for shipping

BR
Günni

 

[his047]

Hi Günni,

Are you still looking for a European transformer? I am located in the UK and am looking to replace my transformer with a toroid in my second DH220

 

[schillg11]

Hi his047

sorry for the late answer from here.
Since i was a owner of a DH220 in past, i know that the transformer from the DH 220 doesn't fit in the DH-120. thanks again for your offer.

Just for interest, what kind of toroid will you install in your DH220 (size, power, voltage)

BR
Günni

 

[his047]

Nuvoterm
0500P1-2-040 | 2 Output Toroidal Transformer, 500VA, 2 x 40V ac | Nuvotem Talema

It requires a minor modification: the fuses for the +/- sully need to be replaced with the smaller 20mm types, but once that is done there is no problem.

(Oh, And I was wrong, I have two DH 200, not DH220)