hello everybody! im a bassist and i've just defretted my bass step by step, resoldered the pots( basics😀 ).. now i wanna try builiding something like a pickup booster or simple preamp through the schematics posted here. but i dont know basic wiring signs, legends, terms, parts etc. you guys are using in you're diagrams. 🙁 ...can anyone help me find where i can learn the basics? where i can get started?? i would greatly appreciate any help 🙂 thanks a lot!
Hi cofibreyk and welcome.
Did you have a particular schematic in mind? Please provide a link.
There's a very good site which I like to refer to for learning the basics: http://www.bcae1.com/
It's basically a car audio site but there's ton's of info presented in a very visible and understandable way.
/Hugo 🙂
Did you have a particular schematic in mind? Please provide a link.
There's a very good site which I like to refer to for learning the basics: http://www.bcae1.com/
It's basically a car audio site but there's ton's of info presented in a very visible and understandable way.
/Hugo 🙂
Thanks a lot for the help netlist!😀 a lot of basic infos. just what i needed. i'll try to find the schematic posted here. provide a link later....thanks again mod netlist! 🙂 😀
Hi.
You're looking for a booster/preamp. This amplification can be done with various Semiconductors like Transistors/Fets, Opamps usw.
A good Site for this Stuff is: http://www.generalguitargadgets.com/
Go to "Effects Projects_Boosters/Routers"
You're looking for a booster/preamp. This amplification can be done with various Semiconductors like Transistors/Fets, Opamps usw.
A good Site for this Stuff is: http://www.generalguitargadgets.com/
Go to "Effects Projects_Boosters/Routers"
- Status
- Not open for further replies.