I have found some of the best pliers in USA for nearly nothing, he keeps selling 5 at a time but for some strange reason, cant he get the system to allow people from Denmark as byers. He have tried, I have also contacted ebay but with no result.
If you please will help me to bye the pliers and ship them to me, will I be super happy. I do pay in advance of cause!
If you please will help me to bye the pliers and ship them to me, will I be super happy. I do pay in advance of cause!
Member
Joined 2009
Paid Member
Link would be great - I am looking for a set of good side cutters - all the affordable ones I have seen so far appear to be made in that eastern country from recycled pig iron - that is is, the blades are soft and do not line up and the fulcrum wobbles. Have found an Oz supplier but at AU$50+ I dunno....
Thanks to you all, and sorry for my late answer.
It turned out to be used pliers with no guaranty on how used they were.
Knipex is a great tool, I have choosen the NWS instead as I think they are even better, but both Knipex and NWS it the normal size pliers, where I am looking for the small pliers for where normal size is to big.
As jfetter writes, do pliers often get damaged by some components that have very hard leads. So I am looking for something that are ment for work.
Do any of you know the Tronix brand?
It turned out to be used pliers with no guaranty on how used they were.
Knipex is a great tool, I have choosen the NWS instead as I think they are even better, but both Knipex and NWS it the normal size pliers, where I am looking for the small pliers for where normal size is to big.
As jfetter writes, do pliers often get damaged by some components that have very hard leads. So I am looking for something that are ment for work.
Do any of you know the Tronix brand?
Yes side cutters is something you can buy from a lot of brands and they are mostly great, but needle nose, round nose, flat nose and so on, is harder to obtain in a small size and still in a pro quality.
Knipex is without doubt one of the top brands, but it's German, so you know it is quality.
Sorry but I have a hard time to judge the size of these pliers?
They are as mini as mini can be. I trust I have given enough info, please consult their website. In fact I have obtained these as not many other brands have such a complete program in small size pliers (in all forms). Their ESD safe line is very good but expensive. These are black and grey coloured.
Last edited:
Hello fellow Dane.
Attached link is Danish they have knipex pliers from big to small, think green buy local...
Knipex Tang & Laseringstang | Se udvalget online & Kob her
Attached link is Danish they have knipex pliers from big to small, think green buy local...
Knipex Tang & Laseringstang | Se udvalget online & Kob her
LOL oh, smart done!Check the size of the pliers in my picture and compare to the cotton part of a Qtip right upper corner. I put that there on purpose but I guess one has to tell every detail to people that just don't look
Keep clear of these as they are not the same quality as the other types. The pressed steel series are just OK but they are faster blunt than the normal types. Your danish colleague gave a good link. You will notice (I hope) that most of the small sized pliers are 125 mm.
LOL oh, smart done!
Attachments
Last edited:
I have to admit that "buy green" to me is something I don't care aboutHello fellow Dane.
Attached link is Danish they have knipex pliers from big to small, think green buy local...
Knipex Tang & Laseringstang | Se udvalget online & Kob her
If I can buy pliers to the same price locally, I'll do it but if I can save money by buying outside, I'll do that.Often do you pay insanely in Denmark, some items I have bought in USA for less then 200$ did cost fare beyond 1500$ in Denmark!
Can you post the link?I have found some of the best pliers in USA for nearly nothing,
Thanks