I am doing my home theater for living room.
Unfortunately there not much space for center speaker max size available is (18 inch x 9 inch)
Also I am not very inclined to have separate subwoofer. Although i have selected some speakers but i am not sure.
I will buy parts from parts-express
Rear
------------------
Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter
Dayton Audio DW3-1053SC 3" Full Range Driver
Side
-----------------
Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter
Dayton Audio RS100-8 4" Reference Full-Range Driver
Center
-----------------
Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter
https://www.parts-express.com/hivi-b4n-4-aluminum-midbass-round-frame--297-429#!
Unfortunately there not much space for center speaker max size available is (18 inch x 9 inch)
Also I am not very inclined to have separate subwoofer. Although i have selected some speakers but i am not sure.
I will buy parts from parts-express
Rear
------------------
Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter
Dayton Audio DW3-1053SC 3" Full Range Driver
Side
-----------------
Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter
Dayton Audio RS100-8 4" Reference Full-Range Driver
Center
-----------------
Dayton Audio DC28F-8 1-1/8" Silk Dome Tweeter
https://www.parts-express.com/hivi-b4n-4-aluminum-midbass-round-frame--297-429#!
With those drivers in mind I would use RS100-8 all round.
The rears in sealed 3L cabs and the fronts in ported 4.75L ones tuned to 63Hz.
This is going by a rough&ready ISDonline sim but I see no reason NOT to use the same driver everywhere.
The rears in sealed 3L cabs and the fronts in ported 4.75L ones tuned to 63Hz.
This is going by a rough&ready ISDonline sim but I see no reason NOT to use the same driver everywhere.
I have 8" wide cabinets, and could fit in a 5 1/4" with no problem. Could have probably done six inchers too.
A Speaker Maker's Journey: Introducing the LM-1C
A Speaker Maker's Journey: Introducing the LM-1C
- Status
- Not open for further replies.