I just bought a 'duff' Nait 1 (as described), and am checking a few things out.
The LED lights up, so there is something going on, but on measuring the voltage on the secondary of the transformer, I only read 8V peak to peak (using a scope).
Has anyone got any ideas, or better still, a schematic and some information.
Thanks
Mike
🙂
The LED lights up, so there is something going on, but on measuring the voltage on the secondary of the transformer, I only read 8V peak to peak (using a scope).
Has anyone got any ideas, or better still, a schematic and some information.
Thanks
Mike
🙂