Spectacularly bad idea unless the Mundorf carries an X1 rating allowing direct connection across AC mains.
Actually I'm not sure the Auricaps carry this rating either... and no, a given high voltage rating alone is not enough.
Actually I'm not sure the Auricaps carry this rating either... and no, a given high voltage rating alone is not enough.
That they do not X1
I also know
the AURICAP ar not also 😉
I asked a specific, if anybody here used them for this purpose
Denon these capacitors after the fuse so I'm not worried
And many people have used this technique
You know you can buy Vishay X2 rated poly film caps upto 10uf in size that are designed specifically for the job?
http://www.vishay.com/docs/28118/mkp3384x2.pdf
http://www.vishay.com/docs/28118/mkp3384x2.pdf
Yes I know bro
Capacitors VISHAY lot of
Give a rating of the AC voltage
Most of my parts
In projects are of VISHAY
Love this company
I am a little biased I'm from Israel 😉
I ordered now
4 capacitors of
Mundorf MCap SUPREME
2 PART 0.1UF 1400V
2 PART 0.33UF 1400V
2 for my denon dvd 2900
2 for my denon dvd 3910
I will get them in a few days from Germany😉😉😉😉
4 capacitors of
Mundorf MCap SUPREME
2 PART 0.1UF 1400V
2 PART 0.33UF 1400V
2 for my denon dvd 2900
2 for my denon dvd 3910
I will get them in a few days from Germany😉😉😉😉
Attachments
Last edited:
Also ordered
auric hook-up wire 18 awg
My plan is
Forming the capacitor outside of the printed circuit
on a Surface Insulation of
T GLOBAL - H486-150-0.5A - GAP FILLER, 0.5MM SHEET
and conect the mundorf supreme With the cable auric 18 awg
Back to the printed circuit 🙂
- Status
- Not open for further replies.